PipelineFX Forum
Qube! => Installation and Configuration => Topic started by: slubitz on April 16, 2009, 01:39:51 PM
-
Hi all,
I am evaluating Qube! at the moment and after the installation I recognised some Problems.......
For Example:
I have a very small qbwrk.conf file located in c:\
[GlobalSettings]
proxy_execution_mode=user
client_host_domain=mydomain
After I run: qbadmin worker --reconfig the configuration on the Worker is still the same.
Is there a reason why?
I tried also qbconfigfile c:\qbwrk.conf.The output seems to be OK.
I can set the Values manually on each Client, but this is boaring :-)
Systemdata:
Supervisor: W2k8,64bit, 192.168.103.205
Clients: XP,64bit, 192.168.103.xxx
Has someone made the same experience?
Regards,
Stefan
-
It looks like you do not have the file placed in the right location. On Windows, the qbwrk.conf file needs to go into the C:\WINDOWS directory (and will be next to the qb.conf file). On Linux and OSX, the location is /etc/qbwrk.conf.
Here are 2 useful tools for working with the central worker configuration. (the Linux/OSX path to qbwrk.conf is shown in the examples below):
- sbin/qbconfigfile /etc/qbwrk.conf : Show the expanded variables for the workers.
- sbin/qbadmin worker --reconfigure : Pushes out a changed qbwrk.conf file for workers already running. This can take a few minutes for large farms.
- sbin/qbadmin worker --configuration <hostname> : Displays the configuration of the specified worker.
The workerlog may also provide some debugging information if the configuration is not being picked up:
? Linux/Mac OS X ? /var/log/workerlog
? Windows ? C:\Program Files\qube\logs\workerlog
See the Administration pdf manual Chapter 3 for more information on the qbwrk.conf topic.
-
Hello everyone, despite following the examples and browsing the documentation pretty thoroughly, I'm still having trouble getting my workers to update from a global config file. I am doing a very very simple qbwrk.conf file, only attempting to add a group to a few of my workers. After doing qbadmin worker --reconfigure I get no errors. Looking at a workers log file I see that it receives the update request but nothing changes. Any thoughts?
-
I'll bump this thread with a similar and equally infuriating problem.
I am attempting to set up a rudimentary qbwrk.conf file on our supervisor system, a virtual server. The file currently has this in it;
[805a[01-15]]
worker_groups = "DAC"
[805b[01-15]]
worker_groups = "DAC"
Which in theory should assign our two labs to the same group, DAC. After saving this file I ran qbadmin w -reconfigure on the supervisor and absolutely nothing happened. I have tried restarting the supervisor and worker services, and looked extensively through the qb.conf files on both worker and supervisor for a clue as to why this refuses to update and reassign the workers to groups. Can anybody point me in the right direction?